Login: Your Yale NetID

Password: Your Yale Password


Advanced Technology Equipment Scheduling Agreement

  • I understand and agree to the following conditions when scheduling Advanced Technology equipment
  • If I reserve more time than allowed, my access will be removed from the equipment reservation system.
  • I will adhere to the maximum allowed reservation time slots as listed below.
  • If I am late for my reserved slot, my reserved slot will become available to others.
  • I will only reserve equipment for a maximum of 2 consecutive days at a time.
  • I will only reserve equipment when I need to use it. I will not pre-reserve equipment with the expectation of using it in the future.
  • When my reservation time is up, I must yield the equipment I am using to the next person who has the equipment reserved.
  • By selecting a reservation calendar below, you are agreeing to adhere to these policies.
  • Equipment located in the Shops are only available when the shop is open. Scheduling a piece of equipment is not a guarantee that you will be able to use it.

Please Note:
Abuse of the reservation system, will result in loss of time reserved and permanent loss of access to the reservation system.

Please Note:
Abuse of the reservation system, will result in loss of time reserved and permanent loss of access to the reservation system.

The success of this reservation system depends on responsible and courteous use by all. Abuse by just one person can result in the loss of the effectiveness of the overall system. Please be respectful of others when reserving equipment. If you see abuse of this system taking place, please notify an Advanced Technology staff member right away and the issue will be rectified.


Make a Reservation

Laser Cutters

Maximum Reservation of one hour per day per laser cutter, Max of 2 consecutive days at a time.

Zund Digital Cutter

Maximum Reservation of one hour per day, Max of 2 consecutive days at a time.

Digital Photography Stations

Maximum Reservation of one hour per day per station, with the model being removed after the alloted time.

3D laser Scanning Stations

Maximum Reservation of four hours per day per station.

Small CNC Mills

Maximum Reservation of twelve hours per day on this equipment, Max of 2 consecutive days at a time.

Large CNC Mills

Maximum Reservation of eight hours per day on this equipment, Max of 2 consecutive days at a time.

WaterJet

Maximum Reservation of four hours per day on this equipment, Max of 2 consecutive days at a time.